LINTEL AND SUNSHADE.Experiment No:-16

 

Experiment No:-16

 

LINTEL AND SUNSHADE

Aim:-

To draw the Lintel and sunshade using AutoCAD software

Problem

The following are the particulars of a lintel with sunshade.

Clear span of lintel - 2 m

Bearing on either side - 300 mm

Size of lintel - 300 x 200 mm

Width of brick wall - 300 mm

Width of Sunshade - 0.9 m

Thickness of Sunshade - 100mm

at support and 50 mm at free end Reinforcement details:

Lintel - 12 mm Fe 415 steel (5 Nos.)

Main (tensile) reinforcement --10mm Fe4l5steel 2 Nos.

Shear reinforcement - Fe4l5steel8mm 2 legged stirrups 175 mm c/c

Sunshade

Main reinforcement - Fe 415 steel 10 mm @ 230 mm c/c.

Distributors - Fe 415 steel 8 mm 300 mm c/c

Anchorage and curtailment of reinforcement may be adopted with standard values and any more data required may be assumed suitably

Draw the following views to a suitable

scale.

1. Longitudinal section of lintel.

2. Cross section of lintel and Sunshade at mid span and at support.

3. Plan of lintel and Sunshade.

4. Prepare a bar bending schedule for the lintel and Sunshade.

Hanger rods Shear reinforcement

Procedure:

switch on the computer

Open Auto CAD 2014

Setting units

( ii) set the unit as decimal & millimeter

Setting limits

Zoom – All

Using Line command R.C.C. slab culvert with splayed wing wall are drawn.

using hatch command where our necessary Dotted lines are drawn using line type.

 

Result:

Thus the Lintel and sunshade are drawn using

Auto CAD 2014 software

Please Wait 20 Seconds to Download........

You have to wait 20 seconds.