SIMPLY SUPPORTED ONE WAY SLAB.Experiment No:-9

 

Experiment No:-9

 

SIMPLY SUPPORTED ONE WAY SLAB

Aim:- Draw sectional plan and sectional elevation of simply supported one-way slab with the following data using AutoCAD software

Problem:

The following are the particulars of a simply

supported one way roof slab

Size of room = 3 m X 7 m

Thickness of wall = 500 mm

Bearing on wall = 300 mm

Thickness of slab = 150 mm

Main bars = 10 mm ф @ 150 mm c/c (with alternative bars bent up)

Anchorage and curtailment of reinforcement may be adopted with standard values and any more data required may be assumed suitably

Draw the following views to a suitable scale

1.Cross section of the slab showing reinforcement details

2. Plan at bottom showing reinforcement arrangements

3. Plan at showing reinforcement arrangements

4. Prepare bar bending schedule for 1m width of slab

Procedure:

1. switch on the computer

2. Open Auto CAD 2014

3. Setting units

( ii) set the unit as decimal & millimeter

4. Setting limits

5. Zoom – All

6. Using Line command Simply supported one way slab are drawn.

7. using hatch command where our necessary

8. Dotted lines are drawn using line type.

Result:

Thus the Simply supported one way slab are drawn using Auto CAD 2014 software

Download pdf & dwg File Of this Drawing.....................

Please Wait 20 Seconds to Download........

You have to wait 20 seconds.